Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position Ingestion-build-64721 BS EN 60704-2-2 does not

BS EN 60704-2-2 does not apply to:

This enables producers to ensure quality of required reactive open fire fuels

These breakdown voltages and withstand voltages are a function of the dielectric characteristics and the insulation properties of the anodic oxidation coatings

A band saw (also written bandsaw) is a machine with long tooth blade rotating on wheel that cut material held by a table

Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position Ingestion-build-64721 BS EN 60704-2-2 does not1 Scope This European Standard specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four tolerance classes, these being based on customary workshop accuracy. The main criterion for the selection of a particular tolerance class should be the functional requirements which are to be met. The applicable tolerances are always those which are stated in the drawing. Instead of specifying individual