180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 114.3 mm CLR) NPS 1/2 Minimum Inside Radius: Approximately 70”

Minimum Inside Radius: Approximately 70” (1778 mm)

Includes: 1-1/4" Dimple Die | Requires 1-1/4" Pilot Hole

Minimum Inside Radius: Approximately 18-70” (457-1778 mm)

Maximum Outside Diamter (OD): 2" (50

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 114.3 mm CLR) NPS 1/2 Minimum Inside Radius: Approximately 70”Specs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109" (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2" (114. 3 mm) Maximum Degree