0.2 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-02m GaP Knife with special silicon coating

Knife with special silicon coating in cutting die is available upon request to cut Li metal foil

The bottom cylinder (piston) is shown in the illustration in the dimension section

175 mm Thickness

This is the right side of the smart sealing assembly for 2" vacuum tube furnace to seal one end of OD 50-52 mm (2")  tube without any welding and gluing

0.2 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-02m GaP Knife with special silicon coatingNickel Foam for Battery Cathode Substrate (1000mm length x 200mm width x 0. 2 mm thickness) EQ bcnf 02m Specifications Material: Nickel Foam, (excellent anti corrosive) Purity: > 99. 9 wt % Impurity: C? 200S? 80Fe? 100Cu? 100Si? 50 ( ppm) Surface Density: 346 g m^2 Length: 1 meter Width: 200mm Thickness: 0. 2 mm Net weight: 104g Porosity: ? 95% (80 110 Pores per Inch. average hole diameters about 0. 25mm) Extensibility: Lengthwise? 5%; Widthwise? 12%