Go/No Go Gauge Orifice ID 0.0411"/0.0415" Manufacture Certificate All Melt Flow Indexers Dead weight piston plastometer for

Dead weight piston plastometer for procedure A – manual operation: calculating flow rate (melt index) for each cut off

Use the ISO 179 Charpy setting gage to space the ISO 179 Charpy anvil and center in reference to the ISO 179 Charpy striker

*Please contact the factory if required to be used with the MP1200 Selectable Weight model*

Use this brass cleaning brush to clear residual material out of the standard die

Go/No Go Gauge Orifice ID 0.0411"/0.0415" Manufacture Certificate All Melt Flow Indexers Dead weight piston plastometer forThis gauge is used to ensure the inner diameter of the half die orifice falls within 0. 0413 + 0. 0002" as required by ASTM D1238 and ISO 1133. This gauge is certified by the manufacturer. Standards: ASTM D1238, ISO 1133 P N: 02001134