Sonsbeek Dry Rear Entry Gauge - 1/4" & 1/8" | 40mm | 175 PSI chisels stable hold

stable hold

The diamond-coated 360° end hook offers 50% more gripping power

Important: If mould is present or if timber is in a mould prone area

cabinetry and light woodworking

Sonsbeek Dry Rear Entry Gauge - 1/4" & 1/8" | 40mm | 175 PSI chisels stable holdThese gauges are ideally suited for Compressors, Rotary Pumps and Regulators. When ordering please order a reading higher than the expected operating conditions, as it may stretch if used continuously on the maximum readout. If operating around 600 700Pa 85 100PSI, a 1000kPa 1445PSI gauge should be used as a general guide gauges should operate at around 60 70% of their readout.