Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC Bit simply swing it up or

simply swing it up or slide your board into the front of the curved foot

When you're hard at work in your shop

You build the support wings out of plywood (or another sheet material)

1-Phase Arbor Size: 5/8" Arbor Speed: 4500 RPM Blade Size: 10" Blade Tilt Direction: Left Maximum Blade Tilt: 45 Degrees Maximum Depth of Cut At 90 Degrees: 3-1/8" Maximum Depth of Cut At 45 Degrees: 2-1/8" Maximum Rip Right of Blade w/Included Fence & Rails 37" Floor to Table Height: 35" Table Size with Extension Wings Width: 44" Table Size with Extension Wings Depth: 27" Distance Front of Table to Center of Blade: 13-3/8" Distance Front of Table to Blade At Maximum Cut: 8-21/32" Dust Port: 4" Overall Width (side-to-side): 66-13/16" Overall Depth (front-to-back): 39-3/8" Shipping Weight: 368 lbs

Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC Bit simply swing it up orMaterial: Chipboard, Balsa Core, Hardwood Softwood, Plastic Overview Replacement carbide knife for RC 2255, RC 2259, RC 2261, and RC 2263 cutters Recommended for: Chipboard, Balsa Core, Hardwood Softwood, Plastic